The T-M32 is a fully modulating, gas-fired, tankless on-demand water heater specifically designed for heavy-duty commercial applications. The T-M32 offers "true commercial grade" components and can be Easy-Linked and Multi-Linked to meet high demands. It can be installed either outdoors, indoors, or direct-vented. It can supply to domestic hot water systems or to heating applications (local codes dictate proper compliance). Features a thicker heat exchanger drum for added durability. Multiple units can be combined in a system of water heaters to provide for larger applications such as hotels, large restaurants, apartment complexes, etc. Please check with all local codes prior to installation.
240,000 BTU/U, up to 9 GPM (Max)
The versatility of being installed either indoor, outdoor, or with a direct vent, all with the same unit.
Easy-link capability up to 4 units. You may connect up to 20 units and generate over 180 GPM using a multi-controller unit.
Offers precise control of the water valves.
8 new dipswitch temperature settings: 100 F, 115 F, 120 F, 135 F, 145 F, 155 F, 165 F, and 185 F. These temperatures are better suited for commercial applications.
7-segment LED for error codes: Remote controller is not required to pinpoint problems.
Ignition indicators: indicates which burner is fired up at the moment.
Utilizes the air-fuel ratio rod for added safety.
The drum thickness has been increased 25% for greater heat exchanger performance and to be more resistant to thermal stress.
Increase in fin pitch: Fins are more "spread out" which improves the durability of the heat exchanger. More space in-between the fins reduces build-up. Higher temperatures at the top of heat exchanger reduces condensation.
24000 to 240000 BTU
Min Pressure (W.C.):
Max Pressure (W.C.):
Category III Stainless Steel
Min Flow (GPM):
Max Flow (GPM):
0.5 - 9 GPM
Max Pressure (PSI):
Temperature Range (F):
113°F to 167°F
1st Hour Delivery (Gallons):
15 psi to 150 psi
Outlet Water Temp:
100°F to 185°F
12 Year Ltd. Warranty on Heat Exchanger/ 5 Year on Parts
You're reviewing: Takagi T-M50 Tankless Water Heater
No reviews have been submitted for this product yet.
we have a 73 unit apartment bldg. currently we are using Raypack boilers for water heating for 87 showers, we need to replace them, is Takagi T- M50 s suitable to use and if yes how many of those we would need to accomplish the job, please advise
Question by: Rafik on Sep 27, 2015 6:48:00 PM
We need to know what water heater you have it . what is the model number ?